| Cat No. |
MISCELLANEOUS ITEMS |
Łeach |
Image |
| |
FLY-WHEELS - MACHINED BRASS - 10BA GRUB SCREW FIXING ON 5/16" x 1/8" BOSS |
|
 |
| FW1 |
1" x 3/8" x 2mm bore. |
5.00 |
|
| FW2 |
22mm x 10mm x 2mm bore. |
5.00 |
|
| |
PTFE TOP HAT BEARINGS |
|
|
| PTFE10 |
Pack of 10 PTFE Top Hat Bearings - low friction, do not need lubricating, may be used to replace brass bearings, will accommodate most carriage & wagon wheelsets. |
4.50 |
|
| |
GEAR BOXES - ASSEMBLED AND FITTED WITH MASHIMA MOTORS FOR 3/16" AXLES |
|
|
| GB1630 |
30:1 ratio 16mm diameter motor |
45.00 |
|
| GB1640 |
40:1 ratio 16mm diameter motor |
45.00 |
|
| GBL1830 |
30:1 ratio 18mm flat can motor |
49.00 |
|
| GBL1840 |
40:1 ratio 18mm flat can motor |
49.00 |
|
| |
AXLE BOX AND RETAINER FOR 5/16" SLOT IN 1MM THICK SIDE FRAME |
|
|
| BAB1 |
PAIR of Brass axleboxes for 1/8" axle. |
3.50 |
|
| BAB2 |
PAIR of Brass axleboxes for 3/16" axle. |
3.50 |
|
| BAB3 |
PAIR of Brass axleboxes for 1/4" axle. |
3.50 |
|
| NS1 |
PAIR of Nickel-silver retainers for axle box (10BA fixing). |
2.50 |
|
| |
MACHINED BRASS ACCESSORIES |
|
|
| MB1 |
10 x Brass top hat mainframe bearings for 3/16" axles in 6mm hole fixing. |
3.50 |
|
| MB2 |
20 x Brass pin-point axle bearings for narrow gauge wheels. |
4.00 |
|
| MB3 |
PAIR of Brass (slotted end) 4mm diameter point or signal rod pulls, drilled through for 10BA tapping |
2.50 |
|
